1 WIRE, 5/16" 155°C V-TUF BLUE JETWASH HOSE (Thick Walled) - DN8 (Per metre) - VTB1516-1M

V-TUF WASHFLEX High Pressure Jet Wash Hose (price per meter) - Please state what length you require and the hose ends need swaging on with the correct equipment.
V-TUF WASHFLEX is known for being resistance to wear, with comfortable flexibility.
V-TUF Washflex Hose includes Super Tension Braiding Technology (“STBT”) with an impregnated rubber outer.
ISO 1436-1 EN853

• Hose Colour: BLUE
• Hose Type: Solid Wear Resistant Rubber (Wrapped Pattern)
• Hose Braiding: 1 wire (R1)
• Internal Hose Diameter: 5/16" / 8mm / DN8
• External Hose Diameter: 15.5mm
• Sold in lengths up to 100m
• Temperature Range: -40oC to +155oC / -40oF to +311oF
• Max. Working Pressure: 320 Bar / 4700 psi
• Min. Burst Pressure: 960 Bar / 1410 psi
  This figure (Burst Pressure Rating), is to show you the test results. Do not use the hose in an application that goes above the Maximum Working Pressure shown above!
• Swage dimension: 17.5mm on a skived end (Please note: Due to general market inconsistencies, please double check this with a ‘go-no go’ gauge to ensure the hose end is safely swaged on)

Super Tension Braiding Technology - STBTTM

What is 'Super Tension Braiding Technology'?

All Washflex hose has been manufactured to the STBT (Super Tension Braiding Technology) certification.

• Super tension braiding technology (STBT) has raised the benchmark 3.5 times because of the   resilient in an application where there is a lot of flex. Raised the benchmark 350% Greater flexibility.
• REACH approved  inner core – meets fluid contamination regulations. 
• STBTTM is a method of hose braiding when it is manufactured to ensure the strength of the hose is greater than all of the hoses currently available on the European Hose Market. At the same time, STBTTM delivers an outstanding flexibility in both R1 (1 wire) and R2 (2 wire) braided washflex jet wash hose.
• Ensure your hose has the STBTTM rating, for longer lasting results, greater flexilbility, less cumbersome hose, and lighter in weight.

V-TUF WASHFLEX Confidence!

We can confidently say that V-TUF WASHFLEX is a premium product because…...

• We have had a near 100% success rate on V-TUF WASHFLEX – No bursting, pin holes or outer casing falling off. Consistent bore and outside diameter throughout hose lengths.
• The outer rubber casing is thoroughly bonded into the braiding – Prevents delaminating of the external cover. Hoses have been tested and have exceeded the required legislation.
• All hose assemblies embrace ‘Ferrule-Fuse’ technology.
• V-TUF Washflex Hose Solutions include loose hose, Bespoke assemblies, Bespoke branding options, Bespoke stock & release programs.
• A range of colours available – Stand out as different from your competition.
• This gives our dealers and consumers 'peace-of-mind'.