V-TUF Zylock PL020 Hydraulic Sealer is used for all the many types of hydraulic connections, sealing against typical pressure line ratings. It is oil and fuel resistant when set.
Use Hydraulic Seal to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints.
Especially formulated not to clog up systems, suitable for up to 400 bar pressures. Giving and oil-tolerant, vibration proof seal.
Method of Use
This solution is ready for use. Simply unscrew the white lid anti-clockwise. Take off the nib of the spout using a sharp knife. Then tilt the bottle downwards, and gently squeeze the bottle, and you should begin to see the brown liquid; the professional Zylock Hydraulic Sealant is ready for use.
DESCRIPTION:
- Creates a very strong, sealed assembly
- Thixotropic formulation
- Seals up to 0.25mm
- WRAS (WRC.NSF) BS6920
- For use with metal threads
- Ideal for locking & sealing cylindrical threads
- Certification Number 0411511 for hot & cold water
FEATURES & APPLICATIONS:
- Hydraulic Workshops
- Engineering Workshops
- Hydraulic Shafts
- Recommended product on HYUNDAI plant hydraulic control blocks.
- Hydraulic, Pneumatic & General Fittings
- Locking & Sealing of Metal Pipes
- Threaded Assemblies
- Hydraulic Hoses
- Round-shaped Metal Surfaces
SPECIFICATION:
Physical Properties (liquid product)
- Colour: Red (Reddish Brown)
- Chemcial Base: Methacrylate Ester
- Viscosity: 20¥C 1000-1500cps
- Specific Gravity 1.10
- Max gap filling: 0.25mm
- Temp Range: -55°C up to 150°C
Physical Properties (cured product) @23°C - Initial strength: 12-16 minutes
- Final strength: 12 hours
- Breakaway Strength (TBA) (ISO 10964): Up to 18 N.m
- Prevailing Strength (TP) (ISO 10964): Up to 10 N.m
